Marin Bikes

Rift Zone 29" Carbon XR

Marin Rift Zone Carbon XR profile.

See this bike in a different color:
  • Original price : £4,265.00
  • Suspension: Fox Performance Elite Float 36 / Fox Factory Series Coil
  • Wheel Size: 29"
  • Size Range: S, M, L, XL

FAST PACED, EPIC RIDES

PUSHING THE ENVELOPE UP AND DOWN THE TRAIL

CHASING PERSONAL RECORDS

The Rift Zone is our most speed oriented MultiTrac bike, created for the rider looking for the speed and roll over capabilities of 29” wheels in a trail capable package. Long, low, and slack trail geometry is more aggressive than an XC race bike for more control at top speed, and more fun while chasing seconds.

Jump to…

Specifications

  • Frame

    Unidirectional Carbon Fiber Front Triangle, Series 4 Alloy Rear End, 29” Wheels, 125mm Travel, MultiTrac Suspension Platform, 148x12mm Boost Thru-Axle, 73mm Threaded BB w/ ISCG05 Tabs

  • Front Suspension

    Fox 36 Performance Elite Float, 140mm Travel, GRIP 2 Damper, 110x15mm Kabolt Axle, 44mm Offset

  • Rear Suspension

    Fox Factory Series Coil, Coil Spring, Climb Switch, Rebound & Compression Adjustment, Custom Tune, 210x50mm, M8x30mm Top, M8x25mm Bottom, Spring rates: S = 350lb, M = 400lb, L = 450lb, XL = 500 lb

  • Rims

    Marin Aluminum Double Wall, 29mm Inner, Welded Joint, Disc Specific, Tubeless Compatible

  • Hub, Rear

    Forged Alloy, 148x12mm,Disc, 32H, MS Freehub Body

  • Hub, Front

    Forged Alloy, 148x12mm,Disc, 32H, MS Freehub Body

  • Spoke, Nipples

    14g Black Stainless Steel

  • Tires

    Maxxis Assegai 29x2.5”, 3C MaxxGrip, EXO+, Tubeless Compatible

  • Derailleur, Rear

    Shimano XT, 12-Speed, SGS

  • Derailleur, Front

    -

  • Shift Lever

    Shimano SLX, 12-Speed, SL-7100R

  • Crankset

    FSA Gradient, Modular 1x, 32T Direct Mount Chainring, MegaTooth Technology, MegaExo Spindle, Boost Spacing

  • Bottom Bracket

    MEGAEVO BB, 73mm BSA Threaded

  • Chain

    KMC X-12 Silver and Black

  • Cassette

    Shimano Deore M6100, 12-Speed, 10-51T

  • Brake, Front

    Shimano XT, 4-Piston Hydraulic Disc, 203mm Rotor

  • Brake, Rear

    Shimano XT, 4-Piston Hydraulic Disc, 180mm Rotor

  • Brake Levers

    Shimano XT Hydraulic, I-Spec EV

  • Handlebar

    Marin Trail, 35mm Clamp, 7000 Alloy Bar, 800mm Length, 20mm Rise, 5 Degree Up, 8 Degree Back

  • Stem

    Marin CNC, 35mm Length, 35mm Bar Bore

  • Grips

    Marin Grizzly Lock On

  • Headset

    FSA No 42/47, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”

  • Seatpost

    X-Fusion Manic, 1x Composite Remote, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 170mm Travel, 30.9mm

  • Saddle

    Marin Trail Speed Concept Pro

  • Pedals

    -

  • Extras

    Bolt-On Thru-Axle

Specifications, pricing, and availability are subject to change without notice.

Geometry

Rift Zone 29" Carbon XR geometry diagram
S M L XL
Stack 605.64 610.32 614.92 619.6
Reach 425.72 450.74 475.84 510.97
Headtube Angle 65.1° 65.1° 65.1° 65.1°
Headtube Length 100 105 110 115
Seattube Angle 76° 76° 76° 76°
Seattube Length 390 400 425 430
Toptube Effective 576.72 602.91 629.16 665.44
BB Height 347 347 347 347
BB Drop 31 31 31 31
Chainstay 425 425 425 425
Wheelbase 1164.899 1191.97 1219.12 1259.11
Standover Height 648 655 664 667
Fork Offset 44 44 44 44
Seatpost Diameter 30.9 30.9 30.9 30.9
Handlebar Width 780 780 780 780
Stem Length 35 35 35 35
Crank Length 170 175 175 175

All lengths in millimeters

Suspension Setup

REAR SHOCK SETUP

Recommended Sag = 30%/15mm

Step 1: Use your finger to slide the rubber bump stop (on the shock shaft) up to the seal head.

Step 2: Sit on the bike and put all of your weight on the bike. Do *not* cycle the suspension.

Step 3: Measure sag (from shock body to bumper), If it does not match the bike’s recommended sag in millimeters repeat process, and replace coil spring with appropriate rate.

Step 4: Adjust rebound setting to ensure proper control.

FORK SETUP

Marin recommends that all bikes front and rear suspension feel balanced

Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.

Rider weight and shock setup
LBS KG COIL LB/IN
120 54 300
130 59 300
140 64 300
150 68 350
160 73 350
170 77 350
180 82 400
190 86 400
200 91 400
210 95 450
220 100 450
230 104 450
240 109 500
250 113 500
260 118 500
270 122 500

Reviews

This is still a really fun bike, and it would suit anyone whose riding involves mixing up steep fall-line trails with less extreme stuff.

You May Also Like