Skip to main content

Marin Bikes

Rift Zone 29" 1

2023 Rift Zone 29 1 Charcoal Color

See this bike in a different color:

  • Suspension: X-Fusion Sweep Boost RC 29" / X-Fusion O2 Pro R
  • Wheel Size: 29"
  • Frame: Aluminum
  • Size Range: S, M, L, XL

Feel the Rifty Love! Our take on the ultimate do-it-all trail bike, the Marin Rift Zone is made to party, whatever your jam might be. Your ideal partner for everything from all-day epics, to local shred laps to big mountain adventures, the Rifty is Made For Fun.

The Rift Zone 29 brings together trail-taming 29" wheels, 130mm of rear travel, a lightweight aluminum frame and our super-plush MultiTrac suspension platform for endless good times on the trails.

The Marin Rift Zone 29 1 is your gateway to the Rifty family, made to push the limits of your riding but not your bank balance. It's built with super reliable X-Fusion suspension, grippy Vee Crown Gem tires, plenty of Shimano and a hand-picked selection of our favorite Marin components.

Jump to…

Specifications

  • FRAME

    All New Series 3 6061 Aluminum, 29” Wheels, 130mm Travel, MultiTrac Suspension Platform, 141 Boost Spacing (upgradable to 148x12), 73mm Threaded BB w/ ISCG05 Tabs

  • FORK

    X-Fusion Slide Boost RC, 29", 140mm Travel, Compression and Rebound Adjustment, 44mm Offset

  • SHOCK

    X-Fusion O2 Pro R, Custom Tune, 210x55mm, M8x25mm Hardware Top and Bottom

  • RIMS

    Marin Aluminum Double Wall, 29mm Inner, Pinned Joint, Disc Specific, Tubeless Compatible

  • HUB REAR

    Forged Alloy, 141QR, Disc, 32H, HG Freehub Body

  • HUB FRONT

    Forged Alloy, 110x15mm, Disc, 32H

  • SPOKES

    14g Black Stainless Steel

  • TIRES

    Vee Tire Co. Crown Gem 29x2.35", Dual Control Compound, Tubeless Ready

  • DERAILLEUR REAR

    Shimano Deore, 11-Speed, SGS

  • DERAILLEUR FRONT

    -

  • SHIFT LEVER

    Shimano Deore, 11-Speed, SL-5100R

  • CRANKSET

    Marin Forged Alloy, Integrated Steel 32T Narrow Wide Chainring, Boost Spacing

  • BOTTOM BRACKET

    External Sealed Cartridge Bearing

  • CHAIN

    KMC X-11 Silver and Black

  • CASSETTE

    Sunrace, 11-Speed, 11-51T, ED Black

  • BRAKES FRONT

    Tektro HDM-280 Hydraulic Disc, 180mm Rotor

  • BRAKES REAR

    Tektro HDM-280 Hydraulic Disc, 180mm Rotor

  • BRAKE LEVERS

    Tektro HDM-280

  • HANDLEBAR

    Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back

  • STEM

    Marin 3D Forged Alloy, 35mm

  • GRIPS

    Marin MTN, Closed End

  • HEADSET

    FSA No 57E, Semi-Sealed Cartridge Bearings, 1 1/8" x 1 1/2”

  • SEATPOST

    Marin Alloy, 30.9mm

  • SADDLE

    Marin Speed Concept

  • Pedals

    -

  • EXTRAS

    Closed 9-12 Thru-Axle QR System

Specifications, pricing, and availability are subject to change without notice.

Geometry

Rift Zone 29" 1 geometry diagram
S M L XL
Stack 623.6 628.2 637.3 641.8
Reach 435 460 485 515
Headtube Angle 65.5° 65.5° 65.5° 65.5°
Headtube Length 110 115 125 130
Seattube Angle 77° 77° 77° 77°
Seattube Length 390 400 425 430
Toptube Effective 579 605 632.1 663.2
BB Height 343 343 343 343
BB Drop 35 35 35 35
Chainstay 430 430 430 430
Wheelbase 1170 1205.1 1234.4 1266.3
Standover Height 690.2 691.2 701.7 700.5
Fork Offset 44 44 44 44
Seatpost Diameter 30.9 30.9 30.9 30.9
Handlebar Width 780 780 780 780
Stem Length 35 35 35 35
Crank Length 170 170 170 170

All lengths in millimeters

Suspension Setup

REAR SHOCK SETUP

Recommended Sag = 30%/15mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.

Step 5: Adjust rebound setting to ensure proper control.

FORK SETUP

Marin recommends that all bikes front and rear suspension feel balanced

Step 1: After rear sag is set follow the recommended pressure from the fork manufacturer.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.

X-Fusion O2 Pro R

Rider weight and shock setup
LBS KG PSI
120 54 118
130 59 128
140 64 138
150 68 150
160 73 163
170 77 175
180 82 187.5
190 86 200
200 91 213
210 95 225
220 100 238
230 104 251
240 109 265
250 113 279
260 118 294
270 122 -

You May Also Like