Marin Bikes

Rift Zone E2

Rift Zone E2 profile.

Das Rad gibt es auch in einer weiteren Farbe:
  • Federung: Fox 36 Performance Elite / Float X Performance Elite
  • Reifengröße: 29"
  • Rahmen: Aluminium
  • Größenübersicht: S, M, L, XL

MOUNTAIN BIKING WITH A BOOST

THE JACK-OF-ALL-TRADES MTB, ELECTRIFIED

MAXIMIZING FUN

Das high-end eMTB der Linie, das Marin Rift Zone E2, bleibt trotz feinster Komponenten preislich immer noch am Boden. Die sorgfältig kombinierten Specs überzeugen mit Fox Federgabel und Dämpfer, dem leistungsstarken Shimano STEPs EP8 Motor, Shimano’s XT 11-Gang LINKGLIDE Antrieb und einem 630WH Akku. So wie das E1, ist dieses Model serienmäßig mit den CushCore Reifeneinsätzen und Marin Tubeless Kit ausgestattet.

Die wichtigsten Upgrades vom E1:

  • Shimano STEPs EP801 Motor
  • Fox 36 Performance Elite Federgabel
  • Fox Float X Performance Elite Dämpfer
  • Shimano XT 11-Gang LINKGLIDE Antrieb
  • TRP DH-R EVO hydraulische 4-Kolben Scheibenbremsen

Gehe zu…

Ausstattung

  • FRAME

    All New Series 4 Alloy Frame, 140mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor

  • FORK

    Fox 36 Performance Elite, 140mm travel, 29", 110x15mm Boost Kabolt Thru-Axle, 44mm Offset, Integrated Fender

  • SHOCK

    Fox Float X, Performance Elite Series, EVOL Air Spring, Climb Switch, Rebound Adjustment, Custom Tune, 210x55mm, M8x30mm Top, M8x25mm Bottom

  • RIMS

    Marin Aluminum Double Wall, 29" Diameter, 29mm Inner Rim Width, Sleeved Joint, Disc Specific, Tubeless Compatible

  • HUB REAR

    Shimano HB-MT510B, 148x12mm, Centerlock Disc, Micro Spline Freehub Body

  • HUB FRONT

    Shimano MT-410B, 110x15mm, Centerlock Disc, 32H

  • SPOKES

    14g Black Stainless Steel

  • TIRES

    Vee Tire Co. Attack HPL, 29x2.5", Top 40 Tubeless Compatible, Override E-Specific Casing

  • DERAILLEUR REAR

    Shimano, Deore XT RD-M8130, 11-Speed, SGS, LinkGlide

  • SHIFT LEVER

    Shimano Deore XT SL-M8130-R, LinkGlide

  • CRANKSET

    Shimano XT M8150, 160mm Length, 38t Chainring

  • MOTOR

    Shimano Steps EP801 Drive Unit, 250W, 85Nm

  • CHAIN

    KMC E-11S

  • CASSETTE

    Shimano XT LinkGlide LG-600, 11-Speed, 11-50T

  • BRAKE FRONT

    TRP DH-R EVO, 4-Piston Hydraulic Disc, Brake 203mm Rotor

  • BRAKE REAR

    TRP DH-R EVO, 4-Piston Hydraulic Disc, Brake 203mm Rotor w/ Speed Sensor

  • BRAKE LEVERS

    TRP DH-R Evo

  • HANDLEBAR

    Marin Trail, 35mm Clamp, 7000 Alloy Bar, 800mm Length, 20mm Rise, 5 Degree Up, 8 Degree Back

  • STEM

    Marin CNC, 35mm Length, 35mm Bar Bore

  • GRIPS

    Marin Grizzly Lock On

  • HEADSET

    FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”

  • SEATPOST

    X-Fusion Manic, 1x Composite Remote, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 170mm Travel, 30.9mm

  • SADDLE

    Marin eMTB Saddle

  • PEDALS

    Marin MTB Plastic

  • BATTERY

    Shimano BT-EN806, Internal 630Wh

  • DISPLAY

    Shimano SC-E600

  • SWITCH

    Shimano SW-EN600L Left Hand Switch for Assist Mode Change

  • EXTRAS

    Shimano Battery Charger EC-E6002, Shimano CS-EN800 Chainguide, Marin Tire Sealant 250ml, Squeeze Top with Valve Core Removal Tool Cap

Ausstattung, Preise und Verfügbarkeit unter Vorbehalt

Geometrie

Rift Zone E2 geometry diagram
S M L XL
Stack 606.98 614.04 625.1 634.16
Reach 445 465 485 515
Headtube Angle 65° 65° 65° 65°
Headtube Length 100 110 120 130
Seattube Angle 77° 77° 77° 77°
Seattube Length 390 400 425 435
Toptube Effective 585.13 607.22 629.32 661.41
BB Height 348.5 348.5 348.5 348.5
BB Drop 32 32 32 32
Chainstay 440 440 440 440
Wheelbase 1198.29 1222.52 1246.74 1280.97
Standover Heigth 693.65 696.01 709.94 719.93
Fork Offset 44 44 44 44
Seatpost Diameter 30.9 30.9 30.9 30.9
Handlebar Width 800 800 800 800
Stem Length 35 35 35 35
Crank Length 160 160 160 160

All lengths in millimeters

Dämpfereinstellung

REAR SHOCK SETUP

Recommended Sag = 30%/19.5mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.

Step 5: Adjust rebound setting to ensure proper control.

FORK SETUP

Marin recommends that all bikes front and rear suspension feel balanced

Step 1: After rear sag is set follow the recommended pressure from the fork manufacturer.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.

Fox Float X

Fahrergewicht und Luftdruck
LBS KG PSI
120 54 120
130 59 130
140 64 140
150 68 150
160 73 160
170 77 170
180 82 180
190 86 190
200 91 205
210 95 220
220 100 235
230 104 250
240 109 265
250 113 280
260 118 295
270 122 305

DAS KÖNNTE DIR AUCH GEFALLEN