Marin Bikes

WARNING We've identified marinbikesshop.com as a fraudulent website impersonating Marin Bikes. This site has no connection to our company and carries no legitimate stock. Action is being taken.

Rift Zone Carbon 29 2 Frame Kit

2021 Marin Rift Zone 29 Carbon 2 frame kit profile.

Ver bicicleta en otro color:
  • Suspensiones: Fox Float DPX2
  • Wheel Size: 29"
  • Cuadro: Carbon Fiber
  • Rango de tallas: S, M, L, XL

RITMO RAPIDO, SALIDAS EPICAS

EMPUJAR SOBRE EL SENDERO PARA ARRIBA Y PARA ABAJO

CAZANDO RECORDS PERSONALES

CUADRO DE FIBRA DE CARBONO UNIDIRECCIONAL

Salta a…

Especificaciones

  • Frame

    All New Unidirectional Carbon Fiber Front Triangle, Series 4 Alloy Rear End, 29” Wheels, 125mm Travel, MultiTrac Suspension Platform, 148x12mm Boost Thru-Axle, 73mm Threaded BB w/ ISCG05 Tabs

  • Rear Suspension

    Fox Float DPX2, Performance Series, EVOL Air Spring, 3-Position Compression Adjustment, Rebound Adjustment, Custom Tune, 210x50mm, M8x30mm Top, M8x25mm Bottom

  • Headset

    FSA No 42/47, Sealed Cartridge Bearings, 1 1/8” x 1 1/2”

  • Extras

    Marin MTB Seat Clamp Bolt Type, Bolt-On Thru-Axle, Downtube and Chainstay Protectors

Specifications, pricing, and availability are subject to change without notice.

Geometria

Rift Zone Carbon 29 2 Frame Kit geometry diagram
S M L XL
Stack 602.6 607.15 611.7 616.25
Reach 430 455 480 515
Headtube Angle 65.5° 65.5° 65.5° 65.5°
Headtube Length 100 105 110 115
Seattube Angle 76° 76° 76° 76°
Seattube Length 390 400 425 430
Toptube Effective 580.24 606.36 632.51 668.65
BB Height 344 344 344 344
BB Drop 34 34 34 34
Chainstay 425 425 425 425
Wheelbase 1158.92 1186 1213 1252
Standover Height 643 650 659 662
Fork Offset 44 44 44 44

All lengths in millimeters

Registros

REAR SHOCK SET UP

Recommended Sag = 30%/15mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.

Step 5: Adjust rebound setting to ensure proper control.

FORK SET UP

Marin recommends that all bikes front and rear suspension feel balanced

Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.

Fox Float DPX2

Rider weight and air pressure
LBS KG PSI
120 54 125
130 59 132
140 64 140
150 68 150
160 73 160
170 77 170
180 82 180
190 86 192
200 91 210
210 95 220
220 100 230
230 104 250
240 109 260
250 113 280
260 118 300
270 122 310

También te puede interesar