Marin Bikes

WARNING We've identified marinbikesshop.com as a fraudulent website impersonating Marin Bikes. This site has no connection to our company and carries no legitimate stock. Action is being taken.

Rift Zone 29" Carbon XR Frame Kit

2022 Rift Zone Carbon XR Frame Color

Ver bicicleta en otro color:
  • Suspensiones: Fox Factory Series Coil
  • Wheel Size: 29"
  • Cuadro: Carbon Fiber
  • Rango de tallas: S, M, L, XL

RITMO RAPIDO, SALIDAS EPICAS

EMPUJAR SOBRE EL SENDERO PARA ARRIBA Y PARA ABAJO

CAZANDO RECORDS PERSONALES

CUADRO DE FIBRA DE CARBONO UNIDIRECCIONAL

Salta a…

Especificaciones

  • Frame

    Unidirectional Carbon Fiber Front Triangle, Series 4 Alloy Rear End, 29” Wheels, 125mm Travel, MultiTrac Suspension Platform, 148x12mm Boost Thru-Axle, 73mm Threaded BB w/ ISCG05 Tabs

  • Rear Suspension

    Fox Factory Series Coil, Coil Spring, Climb Switch, Rebound & Compresion Adjustment, Custom Tune, 210x50mm, M8x30mm Top, M8x25mm Bottom, Spring rates: S = 350lb, M = 400lb, L = 450lb, XL = 500 lb

  • Headset

    FSA No 42/47, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”

  • Extras

    Marin MTB Seat Clamp, Bolt Type

  • Extras

    Bolt-On Thru-Axle

  • Extras

    Downtube Protector

Specifications, pricing, and availability are subject to change without notice.

Geometria

Rift Zone 29" Carbon XR Frame Kit geometry diagram
S M L XL
Stack 605.64 610.32 614.92 619.6
Reach 425.72 450.74 475.84 510.97
Headtube Angle 65.1° 65.1° 65.1° 65.1°
Headtube Length 100 105 110 115
Seattube Angle 76° 76° 76° 76°
Seattube Length 390 400 425 430
Toptube Effective 576.72 602.91 629.16 665.44
BB Height 347 347 347 347
BB Drop 31 31 31 31
Chainstay 425 425 425 425
Wheelbase 1164.899 1191.97 1219.12 1259.11
Standover Height 648 655 664 667
Fork Offset 44 44 44 44

All lengths in millimeters

Registros

REAR SHOCK SETUP

Recommended Sag = 30%/15mm

Step 1: Use your finger to slide the rubber bump stop (on the shock shaft) up to the seal head.

Step 2: Sit on the bike and put all of your weight on the bike. Do *not* cycle the suspension.

Step 3: Measure sag (from shock body to bumper), If it does not match the bike’s recommended sag in millimeters repeat process, and replace coil spring with appropriate rate.

Step 4: Adjust rebound setting to ensure proper control.

Rider weight and shock setup
LBS KG COIL LB/IN
120 54 300
130 59 300
140 64 300
150 68 350
160 73 350
170 77 350
180 82 400
190 86 400
200 91 400
210 95 450
220 100 450
230 104 450
240 109 500
250 113 500
260 118 500
270 122 500

También te puede interesar