Alpine Trail E1

See this bike in a different color:
- Price: 4,899.00 €*
- Suspension: X-Fusion Trace 36RC 29" / RockShock Super Deluxe Coil R
- Wheel Size: Mixed 29"/27.5"
- Frame: Aluminum
- Size Range: S, M, L, XL
Size Rider height range S 5'3" to 5'6" M 5'6" to 5'10" L 5'10" to 6'2" XL 6'2" to 6'4"
The Marin Alpine Trail E1 sits squarely in the middle of the Alpine Trail family, packing performance and value in equal measure. Go E1 and you’ll get an upgrade to a 630Wh battery, X-Fusion Trace 36RC / RockShox Super Deluxe Coil R suspension and a long-lasting, tough and reliable Shimano 11-speed Deore drivetrain.
Key upgrades from Alpine Trail E:
- Shimano 630Wh battery
- X-Fusion Trace 36RC / RockShox Super Deluxe Coil R suspension
- Shimano Deore 11-speed drivetrain w/11-51t cassette
Jump to…
Specifications
FRAME
Series 4 Alloy Frame, 150mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
FORK
X-Fusion Trace 36 RC, 160mm Travel, 29", 110x15mm Bolt-On Axle, 44mm Offset
SHOCK
RockShock Super Deluxe Coil R, Rebound Adjustment, 205x65mm, 25mmxM8 Lower Hardware, S/M Spring Rate = 300lb, L/XL Spring Rate = 400lb
RIMS
Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
HUB REAR
Shimano HB-MT400B, 148x12mm, Centerlock, Standard Freehub Body
HUB FRONT
Shimano MT-410B, 110x15mm, centerlock Disc, 32H
SPOKES
14g Black Stainless Steel
TIRES
Front: Vee Tire Co. Attack HPL, 29x2.5", Top 40 Tubeless Compatible, Rear: Vee Tire Co. Crown Gem, 27.5x2.8”, TACKEE Compound, Tubeless Compatible
DERAILLEUR REAR
Shimano Deore, Direct Attachment, 11-Speed, SGS
SHIFT LEVER
Shimano Deore, 11-Speed, I-Spec EV
CRANKSET
Shimano EM600, 160mm Length, 38t Chainring
MOTOR
Shimano Steps EP6 Drive Unit, 250W, 85Nm
CHAIN
KMC X-10E, Silver
CASSETTE
SunRace 11-Speed, 11-51T
BRAKES FRONT
Shimano MT420, 4-Piston Hydraulic Disc, Metallic Pads, 203mm Rotor
BRAKES REAR
Shimano MT420, 4-Piston Hydraulic Disc, Metallic Pads, 203mm Rotor w/ Speed Sensor
BRAKE LEVERS
Shimano MT4100 Hydraulic Lever
HANDLEBAR
Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
STEM
Marin 3D Forged Alloy, 35mm
GRIPS
Marin Grizzly Lock On
HEADSET
FSA No 57E, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
SEATPOST
TranzX, YSP23JL, 1x Remote, Size S 150mm Travel, Size M and L 170mm Travel, Size XL 200mm Travel, 30.9mm
SADDLE
Marin eMTB Saddle
PEDALS
Marin MTB Plastic
BATTERY
BT-8036, Internal 630Wh
DISPLAY
Shimano SC-E600
SWITCH
SW-EN600L Left Hand Switch for Assist Mode Change
EXTRAS
Shimano Battery Charger EC-E6002, Shimano CS-EN800 Chainguide, CushCore, 29" Pro Front, Plus Rear, with CushCore Valve Stems, Marin Tire Sealant 250ml, Squeeze Top with Valve Core Removal Tool Cap
Specifications, pricing, and availability are subject to change without notice.
Geometry

S | M | L | XL | |
---|---|---|---|---|
Stack | 613 | 622 | 631 | 640 |
Reach | 445 | 465 | 485 | 505 |
Headtube Angle | 63° | 63° | 63° | 63° |
Headtube Length | 100 | 110 | 120 | 130 |
Seattube Angle | 78° | 78° | 78° | 78° |
Seattube Length | 390 | 400 | 425 | 430 |
Toptube Effective | 575 | 597 | 619 | 641 |
BB Height | 340.5 | 340.5 | 340.5 | 340.5 |
BB Drop | 28 | 28 | 28 | 28 |
Chainstay | 435 | 435 | 435 | 435 |
Wheelbase | 1215 | 1239 | 1264 | 1288 |
Standover Height | 681.6 | 681.4 | 686.8 | 689.8 |
Fork Offset | 44 | 44 | 44 | 44 |
Seatpost Diameter | 30.9 | 30.9 | 30.9 | 30.9 |
Handlebar Width | 780 | 780 | 780 | 780 |
Stem Length | 35 | 35 | 35 | 35 |
Crank Length | 160 | 160 | 160 | 160 |
All lengths in millimeters
Suspension Setup
REAR SHOCK SET UP
Recommended Sag = 30%/19.5mm
Step 1: Set correct pressure in rear shock.
Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.
Step 5: Adjust rebound setting to ensure proper control.
FORK SET UP
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
Rock Shock Super Deluxe Coil R
LBS | KG | COIL LB/IN |
---|---|---|
120 | 54 | 300 |
130 | 59 | 300 |
140 | 64 | 300 |
150 | 68 | 300 |
160 | 73 | 350 |
170 | 77 | 350 |
180 | 82 | 350 |
190 | 86 | 400 |
200 | 91 | 400 |
210 | 95 | 400 |
220 | 100 | 400 |
230 | 104 | 450 |
240 | 109 | 450 |
250 | 113 | 450 |
260 | 118 | 450 |
270 | 122 | 450 |
You May Also Like
Alpine Trail E2
- Description: Wheel Size : Mixed 29"/27.5", Full Suspension | Aluminum
- Price: 7,999.00 €
Alpine Trail E
- Description: Wheel Size : Mixed 29"/27.5", Full Suspension | Aluminum
- Price:
Alpine Trail Carbon 2
- Description: Wheel Size : 29", Full Suspension | Carbon Fiber
- Price: 5,899.00€