Alpine Trail E1
Voir plus de couleurs pour ce vélo:
- Prix: 5 599€*
- Suspension: X-Fusion Trace 36RC 29" / RockShock Super Deluxe Coil R
- Taille de roue: Mixed 29"/27.5"
- Cadre: Aluminum
-
Taille:
S, M, L, XL
Size Rider height range S 160cm to 168cm M 168cm to 178cm L 178cm to 188cm XL 188cm to 193cm
The Marin Alpine Trail E1 sits squarely in the middle of the Alpine Trail family, packing performance and value in equal measure. Go E1 and you’ll get an upgrade to a 630Wh battery, X-Fusion Trace 36RC / RockShox Super Deluxe Coil R suspension and a long-lasting, tough and reliable Shimano 11-speed Deore drivetrain.
Key upgrades from Alpine Trail E:
- Shimano 630Wh battery
- X-Fusion Trace 36RC / RockShox Super Deluxe Coil R suspension
- Shimano Deore 11-speed drivetrain w/11-51t cassette
Spécifications
-
FRAME
Series 4 Alloy Frame, 150mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
-
FORK
X-Fusion Trace 36 RC, 160mm Travel, 29", 110x15mm Bolt-On Axle, 44mm Offset
-
SHOCK
RockShock Super Deluxe Coil R, Rebound Adjustment, 205x65mm, 25mmxM8 Lower Hardware, S/M Spring Rate = 300lb, L/XL Spring Rate = 400lb
-
RIMS
Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
-
HUB REAR
Shimano HB-MT400B, 148x12mm, Centerlock, Standard Freehub Body
-
HUB FRONT
Shimano MT-410B, 110x15mm, centerlock Disc, 32H
-
SPOKES
14g Black Stainless Steel
-
TIRES
Front: Vee Tire Co. Attack HPL, 29x2.5", Top 40 Tubeless Compatible, Rear: Vee Tire Co. Crown Gem, 27.5x2.8”, TACKEE Compound, Tubeless Compatible
-
DERAILLEUR REAR
Shimano Deore, Direct Attachment, 11-Speed, SGS
-
SHIFT LEVER
Shimano Deore, 11-Speed, I-Spec EV
-
CRANKSET
Shimano EM600, 160mm Length, 38t Chainring
-
MOTOR
Shimano Steps EP6 Drive Unit, 250W, 85Nm
-
CHAIN
KMC X-10E, Silver
-
CASSETTE
SunRace 11-Speed, 11-51T
-
BRAKES FRONT
Shimano MT420, 4-Piston Hydraulic Disc, Metallic Pads, 203mm Rotor
-
BRAKES REAR
Shimano MT420, 4-Piston Hydraulic Disc, Metallic Pads, 203mm Rotor w/ Speed Sensor
-
BRAKE LEVERS
Shimano MT4100 Hydraulic Lever
-
HANDLEBAR
Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
-
STEM
Marin 3D Forged Alloy, 35mm
-
GRIPS
Marin Grizzly Lock On
-
HEADSET
FSA No 57E, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”
-
SEATPOST
TranzX, YSP23JL, 1x Remote, Size S 150mm Travel, Size M and L 170mm Travel, Size XL 200mm Travel, 30.9mm
-
SADDLE
Marin eMTB Saddle
-
PEDALS
Marin MTB Plastic
-
BATTERY
BT-8036, Internal 630Wh
-
DISPLAY
Shimano SC-E600
-
SWITCH
SW-EN600L Left Hand Switch for Assist Mode Change
-
EXTRAS
Shimano Battery Charger EC-E6002, Shimano CS-EN800 Chainguide, CushCore, 29" Pro Front, Plus Rear, with CushCore Valve Stems, Marin Tire Sealant 250ml, Squeeze Top with Valve Core Removal Tool Cap
Specifications, pricing, and availability are subject to change without notice.
Géométrie
S | M | L | XL | |
---|---|---|---|---|
Stack | 613 | 622 | 631 | 640 |
Reach | 445 | 465 | 485 | 505 |
Headtube Angle | 63° | 63° | 63° | 63° |
Headtube Length | 100 | 110 | 120 | 130 |
Seattube Angle | 78° | 78° | 78° | 78° |
Seattube Length | 390 | 400 | 425 | 430 |
Toptube Effective | 575 | 597 | 619 | 641 |
BB Height | 340.5 | 340.5 | 340.5 | 340.5 |
BB Drop | 28 | 28 | 28 | 28 |
Chainstay | 435 | 435 | 435 | 435 |
Wheelbase | 1215 | 1239 | 1264 | 1288 |
Standover Height | 681.6 | 681.4 | 686.8 | 689.8 |
Fork Offset | 44 | 44 | 44 | 44 |
Seatpost Diameter | 30.9 | 30.9 | 30.9 | 30.9 |
Handlebar Width | 780 | 780 | 780 | 780 |
Stem Length | 35 | 35 | 35 | 35 |
Crank Length | 160 | 160 | 160 | 160 |
Toutes les tailles sont en mm
Guide suspensions
REAR SHOCK SET UP
Recommended Sag = 30%/19.5mm
Step 1: Set correct pressure in rear shock.
Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.
Step 5: Adjust rebound setting to ensure proper control.
FORK SET UP
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
Rock Shock Super Deluxe Coil R
LBS | KG | COIL LB/IN |
---|---|---|
120 | 54 | 300 |
130 | 59 | 300 |
140 | 64 | 300 |
150 | 68 | 300 |
160 | 73 | 350 |
170 | 77 | 350 |
180 | 82 | 350 |
190 | 86 | 400 |
200 | 91 | 400 |
210 | 95 | 400 |
220 | 100 | 400 |
230 | 104 | 450 |
240 | 109 | 450 |
250 | 113 | 450 |
260 | 118 | 450 |
270 | 122 | 450 |
Vous aimeriez peut-être aussi
-
Alpine Trail E2
- Description: Taille de roue : Mixed 29"/27.5", Full Suspension | Aluminum
- Prix: 6 899€
-
Alpine Trail E
- Description: Taille de roue : Mixed 29"/27.5", Full Suspension | Aluminum
- Prix: 4 999 €
-
Alpine Trail Carbon 2
- Description: Taille de roue : 29", Full Suspension | Carbon Fiber
- Prix: 4 799,00 €