Marin Bikes

Rift Zone E

Rift Zone E profile.

Inne dostępne kolory:
  • Zawieszenie: RockShock 35 Silver R / X-Fusion 02 PRO R
  • Rozmiar koła: 29"
  • Rama: Aluminum
  • Zakres rozmiarów: S, M, L, XL

ROWER GÓRSKI ZE WSPOMAGANIEM

JESZCZE WIĘCEJ ZABAWY

JESZCZE WIĘCEJ ZJAZDÓW

Jeden z najbardziej opłacalnych eMTB, podstawowy model Marin Rift Zone E zapewnia szaloną moc bez rozbijania banku. Za zawieszenie odpowiada przedni amortyzator RockShox i tylny X-Fusion. Shimano Deore zapewnia wytrzymały, niezawodny 10-biegowy układ napędowy. Zupełnie nowy silnik Shimano STEPS EP6 napędzi Cię w wszędzie gdzie będziesz chciał. Standardowo zamontowany jest akumulator 504Wh, z opcją rozbudowy do większego o pojemności 630Wh, aby uzyskać jeszcze większy zasięg.

marin wpis na blogu

Przejdź do…

Specyfikacja

  • FRAME

    All New Series 4 Alloy Frame, 140mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor

  • FORK

    RockShock 35 Silver R 29", Motion Control Damper, 140mm Travel, Maxle Stealth Axle, 42mm Offset

  • SHOCK

    X-Fusion 02 PRO R, Compression and Rebound Adjustment, Custom Tune, 210x55 25xM8 Lower Mount & Upper Mount

  • RIMS

    Marin Aluminum Double Wall, 29" Diameter, 29mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible

  • HUB REAR

    Shimano HB-MT400B, 148x12mm, Centerlock Disc, Standard Freehub Body

  • HUB FRONT

    Shimano MT-410B, 110x15mm, Centerlock Disc, 32H

  • SPOKES

    14g Black Stainless Steel

  • TIRES

    Vee Tire Co. Attack HPL, 29x2.5", Top 40 Tubeless Compatible, Override E-Specific Casing

  • DERAILLEUR REAR

    Shimano Deore, Direct Attachment, 10-Speed SGS

  • SHIFT LEVER

    Shimano Deore, 10-Speed

  • CRANKSET

    Aluminum, 160mm Length, 38t Chainring

  • MOTOR

    Shimano Steps EP6 Drive Unit, 250W, 85Nm

  • CHAIN

    KMC X-10E, Silver

  • CASSETTE

    Shimano Deore 10-speed 11-46T

  • BRAKES FRONT

    TRP Slate Evo, 4-Piston Hydraulic Disc, Brake 203mm Rotor

  • BRAKES REAR

    TRP Slate Evo, 4-Piston Hydraulic Disc, Brake 203mm Rotor w/ Speed Sensor

  • BRAKE LEVERS

    TRP Slate Evo

  • HANDLEBAR

    Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back

  • STEM

    Marin 3D Forged Alloy, 35mm

  • GRIPS

    Marin Grizzly Lock On

  • HEADSET

    FSA No 57E, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”

  • SEATPOST

    TranzX, YSP18JL, 1x Remote, Size S 150mm Travel, All Other Sizes 170mm Travel, 30.9mm

  • SADDLE

    Marin eMTB Saddle

  • PEDALS

    Marin MTB Plastic

  • BATTERY

    Shimano BT-EN805L, Internal 504Wh

  • DISPLAY

    Shimano SC-E600

  • SWITCH

    Shimano SW-EN600L Left Hand Switch for Assist Mode Change

  • EXTRAS

    Shimano Battery Charger EC-E6002, Shimano CS-EN800 Chainguide

Specifications, pricing, and availability are subject to change without notice.

Geometria

Rift Zone E geometry diagram
S M L XL
Stack 606.98 614.04 625.1 634.16
Reach 445 465 485 515
Head Tube Angle 65° 65° 65° 65°
Head Tube Length 100 110 120 130
Seat Tube Angle 77° 77° 77° 77°
Seat Tube Length 390 400 425 435
Top Tube Effective 585.13 607.22 629.32 661.41
BB Height 348.5 348.5 348.5 348.5
BB Drop 32 32 32 32
Chainstay 440 440 440 440
Wheelbase 1198.29 1222.52 1246.74 1280.97
Standover Height 693.65 696.01 709.94 719.93
Fork Offset 42 42 42 42
Seatpost Diameter 30.9 30.9 30.9 30.9
Handlebar Width 780 780 780 780
Stem Length 35 35 35 35
Crank Length 160 160 160 160

All lengths in millimeters

Tabela ciśnień zawieszenia

REAR SHOCK SETUP

Recommended Sag = 30%/19.5mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.

Step 5: Adjust rebound setting to ensure proper control.

FORK SETUP

Marin recommends that all bikes front and rear suspension feel balanced

Step 1: After rear sag is set follow the recommended pressure from the fork manufacturer.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.

X-Fusion 02 PRO R

Waga użytkownika - ciśnienie
LBS KG PSI
120 54 150
130 59 165
140 64 180
150 68 195
160 73 205
170 77 215
180 82 225
190 86 240
200 91 255
210 95 270
220 100 285
230 104 295
240 109 305
250 113 310
260 118 314
270 122 317

Polecamy również