Marin Bikes

WARNING We've identified marinbikesshop.com as a fraudulent website impersonating Marin Bikes. This site has no connection to our company and carries no legitimate stock. Action is being taken.

Alpine Trail Carbon 2 Frame Kit

2021 Marin Alpine Trail Carbon 2 frame kit profile.

See this bike in a different color:
  • Suspension: Fox Float DPX2
  • Wheel Size: 29"
  • Frame: Carbon Fiber
  • Size Range: S, M, L, XL

BIG ALL-MOUNTAIN DAYS WHERE TRAVEL AND GEOMETRY MATTER MOST

BUILT FOR ABUSE AND ROWDY RIDING

ENDURO-STYLE RIDING AND RACING

BIG BIKE, BIG WHEELS, BIG FUN

The Alpine Trail is a 29” wheeled full suspension bike built for the all day enduro rider that earns their downhill fun.

Jump to…

Specifications

  • Frame

    All New Unidirectional Carbon Fiber Front Triangle, Series 4 Alloy Rear End, 29” Wheels, 150mm Travel MultiTrac Suspension Platform, Internal Dropper Post and Rear Derailleur Routing, Chainstay Mounted Post Mount Disc Brake, 148x12mm Boost Thru- Axle, 73mm Threaded BB w/ ISCG05 Tabs

  • Rear Suspension

    Fox Float DPX2, Performance, EVOL Air Spring, 3 Position Compression Adjustment, Rebound Adjustment, 205x65mm, Trunnion Upper Mount, M8x25mm Lower Mount

  • Headset

    FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”

  • Extras

    Marin MTB Seat Clamp, Bolt Type

  • Extras

    Bolt-On Thru-Axle

  • Extras

    Downtube Protector

Specifications, pricing, and availability are subject to change without notice.

Geometry

Alpine Trail Carbon 2 Frame Kit geometry diagram
S M L XL
Stack 619 628 632 643
Reach 430 455 480 515
Headtube Angle 63.5° 63.5° 63.5° 63.5°
Headtube Length 100 110 115 130
Seattube Angle 78° 78° 78° 78°
Seattube Length 390 400 425 430
Toptube Effective 561.7 589 615 652
BB Height 342 342 342 342
BB Drop 35 35 35 35
Chainstay 430 430 430 430
Wheelbase 1199 1229 1256 1297
Standover Height 690 694 695 698
Fork Offset 44 44 44 44

All lengths in millimeters

Suspension Setup

REAR SHOCK SET UP

Recommended Sag = 30%/19.5mm

Step 1: Set correct pressure in rear shock.

Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).

Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.

Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.

Step 5: Adjust rebound setting to ensure proper control.

FORK SET UP

Marin recommends that all bikes front and rear suspension feel balanced

Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.

Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.

Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.

Fox Float DPX2

Rider weight and shock setup
LBS KG PSI
120 54 106
130 59 116
140 64 128
150 68 140
160 73 152
170 77 164
180 82 176
190 86 188
200 91 202
210 95 216
220 100 230
230 104 245
240 109 260
250 113 275
260 118 291
270 122 308

You May Also Like